Hello,
If you loosened any of the brake supply lines either at the master or
brake cylinders it is possible that they are not fully tightened and
could be leaking even if you can not see the leak. Sometimes the
brake line will split at these points and leak too. You need to take
compressed air (an air can used for cleaning computers will work) and
spray the area where the brake line goes through the fitting. If
there is a leak at that point you will see brake fluid when the air
displaces it.
John
At 01:38 AM 2/11/2007, Breda O'Sullivan wrote:
>Ok Guys,
>
>I changed the brake fluid on my 100/6 recently (dot 4), and ever since I
>have had a poor pedal on first pump, followed by a better one on the second
>pump.
|