healeys
[Top] [All Lists]

RE: Fw: Spark Plugs

To: "Bob Yule" <autofarm@cyg.net>, "HEALEY LIST"
Subject: RE: Fw: Spark Plugs
From: "Tom Felts" <tomfelts@earthlink.net>
Date: Tue, 19 Dec 2006 08:40:13 -0500
Great looking web site Bob!!  That blue BJ8 is stunning.  Looks like
mine!!:):):)  Bob--do you happen to have a right side door chrome strip
(for the top of the door)?

Thanks Tom

see you again at the PVGP--I hope.


> [Original Message]
> From: Bob Yule <autofarm@cyg.net>
> To: HEALEY LIST <healeys@autox.team.net>
> Date: 12/19/2006 7:28:25 AM
> Subject: Fw: Spark Plugs
>
> Cheers.......Bob
> Check out our web site www.autofarm.net
> ----- Original Message ----- 
> From: "Bob Yule" <autofarm@cyg.net>
> To: "Rich C" <richchrysler@quickclic.net>
> Sent: Monday, December 18, 2006 8:19 PM
> Subject: Re: Spark Plugs
>
>
> >    Rich, this got me curious so I went and checked.  I have several new 
> > RN12Y plugs, some made in Mexico some in the US and none of them have
the 
> > screw off tops.  I also checked a motor that has been here for over ten 
> > years and the plugs in it don't have the screw off tops either.  I have 
> > some NGK BP6ES plugs and they have screw off tops.  They were made in 
> > Japan.  The other Champions that I have, N5, RN9 all have the screw off 
> > tops.
> > Cheers.......Bob
> > Check out our web site www.autofarm.net
> > ----- Original Message ----- 
> > From: "Rich C" <richchrysler@quickclic.net>
> > To: "Dan Serrao" <jobu1950@yahoo.com>; <healeys@autox.team.net>
> > Sent: Monday, December 18, 2006 7:42 PM
> > Subject: Re: Spark Plugs
> >
> >
> >> That's ridiculous. Champion N11Y and N12Y use exactly the same screw
on 
> >> ends as far as I've ever seen.
> >>
> >> Rich Chrysler
> >>
> >> ----- Original Message ----- 
> >> From: "Dan Serrao" <jobu1950@yahoo.com>
> >> To: <healeys@autox.team.net>
> >> Sent: Monday, December 18, 2006 6:19 PM
> >> Subject: Spark Plugs
> >>
> >>
> >>> Question to all:
> >>>    I have a 63 BJ7. When I got it last year it had Champion N11Y's. 
> >>> Everything I've read says N12Y's so that's what I installed. I just
got 
> >>> a new spark plug wire set from the Nock's and the ends won't fit on
the 
> >>> plugs. I talked with their parts guy and he said they always install 
> >>> N11Y's which have the screw off tips. Since the N12Y's don't have the 
> >>> screw off tips the plug wires won't work. What is everyone using?? TIA
> >>>
> >>>  Merry Christmas to All




<Prev in Thread] Current Thread [Next in Thread>