With fresh motor mounts, you should be able to insert a business card
under the smaller rubber block, old collapsed ones will have the upper
block forced into the lower one.
Jwhlyadv@aol.com wrote:
>I had a similar problem on my BJ8. It was not that the engine was too far
>forward but because the engine had sunk too low. Someone on the list offered a
>
>way to check motor mounts which completely escapes me at the moment.
>
>I found that the motor mounts had allowed the engine to settle lower over
>the past 40 years and a new set of mounts solved my problem.
>
>Thanks,
>Jim Werner
>Louisville, KY
|