On my BN1 there is a nut on the bottom of the wiper arm where it fits on the
shaft, tighten the nut to get the wiper tighter on the shaft loosen to take
it off, something must be worn however, because I have to tighten frequently
to keep them from slipping.
Luckily I don't drive in the rain much
Greg Lemon
54 BN1
----- Original Message -----
From: "Ben Prince" <blprince2@comcast.net>
To: "Healeys" <healeys@autox.team.net>
Sent: Saturday, January 14, 2006 1:25 PM
Subject: Windshield Wiper
> On my BN1, the left windshield wiper blade only travels a few degrees back
and
> forth. The arm slips on the shaft that extends from the wheelbox (items
40
> and 35 on page 94 of my year-old Moss catalog). How does one remove the
> wiper arm from the shaft? Is there some type of catch that must be
released?
> I gingerly pried without success, but I'm afraid increased force will
break
> something. After the wiper arm is off, what is the best way to correct
the
> slipping?
>
> Many thanks,
> Ben
|