Further to my note below, I wanted to do the right thing here and first
passed this by Heritage. They have fully approved my assisting people with
their products in any way I see fit using my own photos and descriptions.
Any of their own customers can ask for their own in house photos, but I will
carry on from there in hopefully assisting people where I can.
I have arranged to have this posted to a friend's web site and will let
everyone know when this is done. This should be available in the next few
days.
First installment:
Trimming late BN4, BN7, BT7 door pockets and panels.
Rich Chrysler
----- Original Message -----
From: "Rich C" <richchrysler@quickclic.net>
To: <tld6008@mchsi.com>
Cc: "Healeys" <healeys@autox.team.net>
Sent: Tuesday, February 08, 2005 3:09 PM
Subject: Re: Installing Heritage door pannels
> Gentlemen,
> Omigosh......There has been such a deluge of requests for this info that
> I'm putting something together that I hope may aid those interested in
> trimming out their late BN4 through BN7/BT7 based on the current Heritage
> kit.
> I'll let you know when I have this completed and where to find it.
>
> Rich Chrysler
>
> ----- Original Message -----
> From: <tld6008@mchsi.com>
> To: "Rich C" <richchrysler@quickclic.net>
> Cc: "Healeys" <healeys@autox.team.net>
> Sent: Tuesday, February 08, 2005 2:40 PM
> Subject: Re: Installing Heritage door pannels
>
>
>> Sure would be helpful if there was a website available to post these
>> valuable
>> instructions. There are lots of us who are asking the same thing just at
>> different times, I know I could use them.
>> --
>> Tim Davis BN7
|