Listers:
I'm now looking at the pannels supplied by Heritage for doing the door
of a BN4 (late) . I'm having trouble figuring out the right approach
and sequence for installing the inner pannels.
The lower pannel they supplied is a little different that what was in
the car. The old pannel I removed had a flap sewn along near the
bottom which acted as the inside bottom of the door. The new pannel
has a loose length of vinyl whih looks like it should be glued to the
bottom inside of the door. There is also a third piece which looks
like it should lie on the bottom of the door but I'm not sure if it
shoud be attached or used, somehow, with the loose vinyl.
I'm also a little concerned on how to get the upper and lower pannels
in to the door without damageing them. It looks like they could easily
crease if bent too much.
I can see that the bottom should go in first but this is the one that
looks to be more trouble to get in.
Is there a trick or proper sequence to follow here ?
The photos supplied by Heritage only show the finished product and
don't give any clues to the fitting process.
Thanks for any help in advance
Sam
|