I use an 1 3/4" on mine and it works fine, maybe just slightly too big, but
on that big a nut I don't think it will strip. I have a 4 cylinder, don't
know if the sixes are different.
Greg Lemon
1954 BN1
----- Original Message -----
From: "David Schweninger" <quenty@ntelos.net>
To: <healeys@autox.team.net>
Sent: Friday, January 28, 2005 10:38 AM
Subject: Healey Crank Nuts (Metal Type)
> Tim and Steve
>
> My crank nut measures 1.665 across the flats. This is about .020 less
> than 1" 11/16 (1" .6875). My 12 pt. 1"7/8 socket was too big and the
> 1'5/8 is too small.
>
> Dave Schweninger
> BN7-II
|