Re: BJ8 turn signals

[Blue One Hundred <international_investor@yahoo.com>]

Ron -

It sounds like your flasher relay is on the fritz. 
Try taking it apart and cleaning the contacts inside
on the relays, sometimes that works.  If not, you'll
have to get a new one.

The other problem may be your wiring is on the fritz. 
Make sure to chase the current feed all the way back
to the turn signal switch and then to the fusebox and
make sure one of the leads someshere hasn't broken off
or the wire is corroded or something.

Regards,

Alan

'53 BN1 '64 BJ8