Distributor Rotors

["John Snyder" <helyjohn@cablespeed.com>]

OK List, here is a challenge.

I went into the Archives and could only come up w/ 2 direct responses to the
issue of where to get a good distributor rotor for a 3000.

One said that any rotor w/ a brass rivet holding the plate to the cap was
suspect.  The other said that Mxx rotors were bad, but that  message was dated
1/11/01.   Obviously out of date.

So, where do I go to buy really good rotors?  I need at least two.

John Snyder