I'm hoping I won't need to take it apart. I have another I can try
switching in before I get to that.
Bill
On May 3, 2004, at 7:53 PM, Greg Lemon wrote:
> I am not sure if the switch has built in adjustment, I think I
> adjusted mine
> by trial and error by bending either the contacts or the springs the
> holds
> the centrifigual weights in place slightly, but it has been a few years
> since I did this and the diagram a have doesn't show this pieces
> internals.
> Sorry for the fuzzy description, but I think it can be done, I would
> be very
> careful and bend slightly and test results, I do remember it seemed
> intuative to me when I had the switch apart (how come I remember that
> but
> not how I did it?).
>
> Greg Lemon
> 54 BN1
>
> ----- Original Message -----
> From: "Bill Lawrence" <ynotink@qwest.net>
> To: <rusd@velocitus.net>
> Cc: "Austin Healey list" <healeys@autox.team.net>
> Sent: Monday, May 03, 2004 7:12 PM
> Subject: Re: Overdrive info
|