Thanks all. I have replaced all parts outside tranny housing but clutch
parts inside. Looks like I'll need to remove this hand brake also.
weeee.
----- Original Message -----
From: <ZManDino@aol.com>
To: <healeys@autox.team.net>
Sent: Thursday, April 29, 2004 5:00 PM
Subject: Re: 60 BN7 Gearbox tunnel removal
> I found that after removing the carpet, seats and all the screws, I still
had
> to disconnect the hand break cable in the rear so that the handle would
move
> far enough back to allow the tunnel cover to come off completely. You may
not
> have to do that if you only need to bleed the slave.
>
> Alex Z '60 BN7
|