Sorry,
Forgot the attachment.
This is my understanding of the correct cap wiring.
Sent from my iPhone
> On 1 Jun. 2017, at 4:00 pm, Chris Dimmock <austin.healey at gmail.com> wrote:
>
> Hi Stephen,
> There are 2 distributor caps that fit a Standard BJ8 distributor. Hence what
> could be your issue.
> Tell me, is the notch/ cutout for the low tension lead at the front or rear
> of the cap?
> The cap with a part number ending in 474 has the cutout at the front, under
> the coil lead, and is Bj8.
> The cap with the part number ending in 902 has the cutout at the back, and is
> sedan.
> Best
> Chris
>
> Sent from my iPhone
>
>> On 1 Jun. 2017, at 12:45 pm, Stephen Hutchings <s.hutchings at rogers.com>
>> wrote:
>>
>> I've come to realize that my cap was rotated and re-wired in the dim past
>> for some reason.
>> That is to say, all the cylinders fire in the correct order, and when they
>> should, but it's not in its original orientation.
>> I would like to return it to the correct position, and re-wire the cap.
>> It seems to me that the cap should have been wired as in the attached
>> diagram...can someone confirm this for me please?
>> Thanks,
>> Stephen, BJ8
>> <Distributor cap.jpg>
>> _______________________________________________
>> Support Team.Net http://www.team.net/donate.html
>> Suggested annual donation $12.75
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>>
>> Healeys at autox.team.net
>> http://autox.team.net/mailman/listinfo/healeys
>>
>> Unsubscribe/Manage:
>> http://autox.team.net/mailman/options/healeys/austin.healey at gmail.com
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170601/f85b329c/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image1.JPG
Type: image/jpeg
Size: 113294 bytes
Desc: not available
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170601/f85b329c/attachment.jpe>
|