Once only ???????. I've been using the same rod bolts, main studs, head studs
etc. for years
jg
----- Original Message -----
From: "Peter Vucinic via Fot" <fot at autox.team.net>
To: "Scott' 'Barr" <sbarr at McCarty-Law.com>, "Chuck Arnold and/or Kathleen
Kelley" <triosan at gmail.com>
Cc: "fot" <fot at autox.team.net>
Sent: Wednesday, May 31, 2017 11:16:02 PM
Subject: Re: [Fot] ARP rod bolt torque
Yep. That's it. Standard write up as per ARP. Only good for new bolts. ARP
are ONCE ONLY use bolts
-----Original Message-----
From: Barr, Scott [mailto:sbarr at McCarty-Law.com]
Sent: Thursday, 1 June 2017 12:51 PM
To: Peter Vucinic; 'Chuck Arnold and/or Kathleen Kelley'
Cc: 'FOT'
Subject: Re: [Fot] ARP rod bolt torque
Yes, it's still there.
http://pauter.com/parts/technical/rod-info/
Scott (B.)
Sent from my Verizon, Samsung Galaxy smartphone
-------- Original message --------
From: Peter Vucinic via Fot <fot at autox.team.net>
Date: 5/31/17 9:31 PM (GMT-06:00)
To: 'Chuck Arnold and/or Kathleen Kelley' <triosan at gmail.com>
Cc: 'FOT' <fot at autox.team.net>
Subject: Re: [Fot] ARP rod bolt torque
Chuck,
Torque/stretch figures should come with the new bolts?
From: Fot [mailto:fot-bounces at autox.team.net] On Behalf Of Chuck Arnold
and/or Kathleen Kelley via Fot
Sent: Wednesday, 31 May 2017 11:21 AM
To: Friends
Subject: [Fot] ARP rod bolt torque
This was the hot oil thread. Tore engine down. Nothing in the sump. Checked
all bearings. All ok. Thrust washers ok, but little clearance.
Now need to torque the ARP rod bolts in the Pauter rods. Looking for help as
to what is the proper value.
Thanks,
Chuck
_______________________________________________
fot at autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/fot/attachments/20170601/542f2e3a/attachment.html>
|