All--
I talked with Joe and he is way backed up as in several months. It is
still nice enough here in MD to go driving about 50% of the time. From
what lots of people say it is very possible that the wear is simply
confined to those parts of the throttle shafts which pass through the carb
body and if that is the case I will simply replace them with new standard
sized shafts.
Next time a front comes through and the roads get salted I will pull things
apart--in the meantime I am driving and in fact that is what I am going to
do today.
Best--Michael Oritt
On Tue, Jan 24, 2017 at 7:20 PM, BJ8Healeys <sbyers at ec.rr.com> wrote:
> Joe Curto charges about $500 to completely rebuild both carbs. I'm not
> sure if he would just ream and install the shaft bushings, but his website
> says he is not accepting anymore work at the moment anyway.
>
> Steve Byers
> HBJ8L/36666
> BJ8 Registry
> AHCA Delegate at Large
> Havelock, NC
>
>
> -----Original Message-----
> From: Healeys [mailto:healeys-bounces at autox.team.net] On Behalf Of Austin
> Healeys List
> Sent: Tuesday, January 24, 2017 4:06 PM
> To: Niels Bengaard
> Cc: Austin Healey
> Subject: Re: [Healeys] SU carb reamer needed
>
> I can't believe people charge $500 per carb to have this done when it only
> requires some basic hand tools.
>
>
> Andy.
>
>
>
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
>
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
>
> Unsubscribe/Manage: http://autox.team.net/mailman/
> options/healeys/michael.oritt at gmail.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170125/ef103e7d/attachment.html>
|