fot
[Top] [All Lists]

[Healeys] wire harness

Subject: [Healeys] wire harness
From: lawrence.swift at gmail.com (Lawrence Swift)
Date: Sat, 21 Jan 2017 09:48:07 -0500
References: <CAB3i7LJom7HWKrqPkpdq8FXfcFb-pzsLYeLz4Njk=qAn=RREzw@mail.gmail.com> <159be7becf4-2c27-3d4c@webstg-m05.mail.aol.com> <1485007084643.2357320.2c18d682484df0473997b62ed65770e4507e3002@spica.telekom.de>
check Rhode Island Wire
> On Jan 21, 2017, at 8:58 AM, josef-eckert at t-online.de wrote:
> 
> Black plastic wrapping isn?t original. It should be a cotton braided loom. 
>  
> Josef Eckert
> K?nigswinter/Germany
>  
>  
>  
> -----Original-Nachricht-----
> Betreff: Re: [Healeys] wire harness
> Datum: 2017-01-21T02:30:40+0100
> Von: "gablegerry at netscape.net" <gablegerry at netscape.net>
> An: "michaelsalter at gmail.com" <michaelsalter at gmail.com>
>  
>  
>  
> The car is a BN6 No. 2344.  Moss list a change to the Wire harness somewhere 
> around 3459. Cannot find an explanation of why the change.  The harness that 
> came of was PVC with black plastic wrapping which I thought was original.  
> would like to be as close as possible to original.
> Thanks
> Gerry
> -----Original Message-----
> From: Michael Salter <michaelsalter at gmail.com>
> To: gablegerry <gablegerry at netscape.net>
> Cc: healeys <healeys at autox.team.net>
> Sent: Fri, Jan 13, 2017 1:49 pm
> Subject: Re: [Healeys] wire harness
> 
> Depends upon what you are trying to achieve.
> If you want to end up with a driver (20 foot) car that Aunt Mary describes as 
> "cute" then whatever works will be just fine.
> If you are looking to end up with something that someone with some knowledge 
> of classic car restoration will appreciate then replace the harness with one 
> that closely replicates the original.
> You don't mention what model of Healey you are working on but originally it 
> would have had cloth covered wire with a cloth covering on the harness (Pre 
> Oct 58) or PVC insulated wires with a cloth harness outer cover after tht 
> date.
> Michael S
> Concours Guidelines Committee
>  
> 
> 
> Looking for an point of view.  should one replace the wire harness that is 
> braided or try to follow the original that appears to be PVC and banded 
> together with black rap. The original is not that bad but again not that good.
> thanks
> can some who is on the MGT list know how to get on it?
>  
> 
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html 
> <http://www.team.net/donate.html>
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive <http://www.team.net/archive>
> Forums: http://www.team.net/forums <http://www.team.net/forums>
> 
> http://autox.team.net/mailman/listinfo/healeys 
> <http://autox.team.net/mailman/listinfo/healeys>
> 
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/healeys/michaelsalter at gmail.com 
> <http://autox.team.net/mailman/options/healeys/michaelsalter at gmail.com>
> 
> 
> -- 
> If you can't fix it with a hammer, you've got an electrical problem.
> 
>  
>  
>  
> ?
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
> Suggested annual donation  $12.75
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> 
> Healeys at autox.team.net
> http://autox.team.net/mailman/listinfo/healeys
> 
> Unsubscribe/Manage: 
> http://autox.team.net/mailman/options/healeys/lawrence.swift at gmail.com
> 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://autox.team.net/pipermail/healeys/attachments/20170121/28293ff1/attachment.html>

<Prev in Thread] Current Thread [Next in Thread>