The car is a BN6 No. 2344. Moss list a change to the Wire harness somewhere
around 3459. Cannot find an explanation of why the change. The harness that
came of was PVC with black plastic wrapping which I thought was original.
would like to be as close as possible to original.
Thanks
Gerry
-----Original Message-----
From: Michael Salter <michaelsalter at gmail.com>
To: gablegerry <gablegerry at netscape.net>
Cc: healeys <healeys at autox.team.net>
Sent: Fri, Jan 13, 2017 1:49 pm
Subject: Re: [Healeys] wire harness
Depends upon what you are trying to achieve.
If you want to end up with a driver (20 foot) car that Aunt Mary describes as
"cute" then whatever works will be just fine.
If you are looking to end up with something that someone with some knowledge of
classic car restoration will appreciate then replace the harness with one that
closely replicates the original.
You don't mention what model of Healey you are working on but originally it
would have had cloth covered wire with a cloth covering on the harness (Pre Oct
58) or PVC insulated wires with a cloth harness outer cover after tht date.
Michael S
Concours Guidelines Committee
On Thu, Jan 12, 2017 at 9:23 PM, <gablegerry at netscape.net> wrote:
Looking for an point of view. should one replace the wire harness that is
braided or try to follow the original that appears to be PVC and banded
together with black rap. The original is not that bad but again not that good.
thanks
can some who is on the MGT list know how to get on it?
_______________________________________________
Archive: http://www.team.net/archive
Healeys at autox.team.net
http://autox.team.net/mailman/listinfo/healeys
--
If you can't fix it with a hammer, you've got an electrical problem.
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170120/fd086758/attachment.html>
|