I presume considerable import tax will be added very soon for all non
American products.
-----Original-Nachricht-----
Betreff: Re: [Healeys] Belleville washers in BN2 steering box
Datum: 2017-01-13T23:07:04+0100
Von: "i erbs" <eyera3000 at gmail.com>
An: "Neil Anderson" <neilandcustom at gmail.com>
I wanted to buy a luggage rack from England, They wanted 248 BPS for the
rack and 125 BPS to ship. I told them to find a cheaper way to ship or I
would not buy the rack. They told me too bad that was what it cost to ship.
Other suppliers have been willing to find a cheaper way to ship when I
asked...
But no VAT applied :)
Ira Erbs
Portland,OR
_______ _______
(______ \____1959 BN4____/ _______)
(_________________________)
BT7 engine and disk brakes
A racing car is an animal with a thousand adjustments. Mario Andretti
Please excuse random auto corrects and misspelled words
On Fri, Jan 13, 2017 at 7:27 AM, Neil Anderson <neilandcustom at gmail.com
Bob,
FWIW, there would be no VAT on export orders from the UK, but shipping is
getting really expensive.
Neil Anderson
BT7
On Thu, Jan 12, 2017 at 11:04 AM, Bob Spidell <bspidell at comcast.net
Well, I went ahead and ordered from Moss. I did a cursory check of the
interwebs didn't turn up anything of those dimensions here:
https://www.mcmaster.com/#standard-washers/=15uvd84
<https://www.mcmaster.com/#standard-washers/=15uvd84>
and here:
http://www.keybellevilles.com/bellevilles/sampleCatalog.php?
gclid=CMCHjPHOuNECFQGRfgodVAoFuA
<http://www.keybellevilles.com/bellevilles/sampleCatalog.php?gclid=CMCHjPHOuNECFQGRfgodVAoFuA>
and others, and I need to get this car back together before I start
losing the little bits. FWIW, SC Parts and AH Spares have them at a
more reasonable price--esp. with the current exchange rate--but with
VAT and shipping it's not a massive savings.
My thanks to Olin, Bob and others who responded; if I come across these
in this size I'll make a note for future reference. Now, at least, I
know what they're for and how to stack them.
Bob
On 1/10/2017 2:14 PM, Olin Brimberry wrote:
Bob, I figured height of the spring was also important, so I put 2
together and measured the height with calipers Height of 2 washers: 0.100
inches Height of 1 washer: 0.050 inches Thickness of washer: 0.025 inches
Checking the previous diameter dimensions with a caliper, I get: ID: 1.057
inches OD: 1.5 inches I suspect that the ID is originally spec'd to be 1-1/16"
but because of the slight "spring", the diameter is slightly less. Good luck
Olin K. Brimberry, PE Principal Engineer obrimberry at hunterbane.com
_______________________________________________
Support Team.Net http://www.team.net/donate.html
<http://www.team.net/donate.html>
Suggested annual donation $12.75
Archive: http://www.team.net/archive <http://www.team.net/archive>
Forums: http://www.team.net/forums <http://www.team.net/forums>
http://autox.team.net/mailman/listinfo/healeys
<http://autox.team.net/mailman/listinfo/healeys>
Unsubscribe/Manage: http://autox.team.net/mailman/
options/healeys/neilandcustom at gmail.com
<http://autox.team.net/mailman/options/healeys/neilandcustom at gmail.com>
_______________________________________________
Support Team.Net http://www.team.net/donate.html
<http://www.team.net/donate.html>
Suggested annual donation $12.75
Archive: http://www.team.net/archive <http://www.team.net/archive>
Forums: http://www.team.net/forums <http://www.team.net/forums>
http://autox.team.net/mailman/listinfo/healeys
<http://autox.team.net/mailman/listinfo/healeys>
Unsubscribe/Manage: http://autox.team.net/mailman/
options/healeys/eyera3000 at gmail.com
<http://autox.team.net/mailman/options/healeys/eyera3000 at gmail.com>
?
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170113/0aee1311/attachment.html>
|