That's correct, you only pay VAT if you live in the UK.
Jean
________________________________
From: Healeys <healeys-bounces at autox.team.net> on behalf of Michael MacLean
<rrengineer.mike at att.net>
Sent: January 12, 2017 8:37 PM
To: Bob Spidell; Olin Brimberry; 'Healeys'
Subject: Re: [Healeys] Belleville washers in BN2 steering box
I don't believe you have to pay the Value Added Tax unless you live in the UK.
Mike MacLean
On Thursday, January 12, 2017 9:29 AM, Bob Spidell <bspidell at comcast.net>
wrote:
Well, I went ahead and ordered from Moss. I did a cursory check of the
interwebs didn't turn up anything of those dimensions here:
https://www.mcmaster.com/#standard-washers/=15uvd84
[https://images1.mcmaster.com/mvA/gfx/mcm_logo_hires.png?ver=1452869604]<https://www.mcmaster.com/#standard-washers/=15uvd84>
McMaster-Carr<https://www.mcmaster.com/#standard-washers/=15uvd84>
www.mcmaster.com
McMaster-Carr supplies products used to maintain manufacturing plants and large
commercial facilities worldwide.
and here:
http://www.keybellevilles.com/bellevilles/sampleCatalog.php?gclid=CMCHjPHOuNECFQGRfgodVAoFuA
Belleville Washer
Catalog<http://www.keybellevilles.com/bellevilles/sampleCatalog.php?gclid=CMCHjPHOuNECFQGRfgodVAoFuA>
www.keybellevilles.com
The catalog reflects 800 of our 10,000 finished parts in stock. Contact us to
see if your part is a stock item. CATALOG SEARCH
and others, and I need to get this car back together before I start losing the
little bits. FWIW, SC Parts and AH Spares have them at a more reasonable
price--esp. with the current exchange rate--but with VAT and shipping it's not
a massive savings.
My thanks to Olin, Bob and others who responded; if I come across these in this
size I'll make a note for future reference. Now, at least, I know what they're
for and how to stack them.
Bob
On 1/10/2017 2:14 PM, Olin Brimberry wrote:
Bob,
I figured height of the spring was also important, so I put 2 together and
measured the height with calipers
Height of 2 washers: 0.100 inches
Height of 1 washer: 0.050 inches
Thickness of washer: 0.025 inches
Checking the previous diameter dimensions with a caliper, I get:
ID: 1.057 inches
OD: 1.5 inches
I suspect that the ID is originally spec'd to be 1-1/16" but because of the
slight "spring", the diameter is slightly less. Good luck
Olin K. Brimberry, PE
Principal Engineer
Office - 919.803.4274
Mobile - 919.522.1608
HunterBane Engineering, PLLC
PO Box 10314
Raleigh, NC 27605
3306 Alamance Drive
Raleigh, NC 27609
-----Original Message-----
From: Olin Brimberry [mailto:obrimberry at hunterbane.com]
Sent: Tuesday, January 10, 2017 4:34 PM
Subject: RE: [Healeys] Belleville washers in BN2 steering box
I just pulled mine out of a steering box I am rebuilding, and yes there are 6
positioned as such: ()()() Where only the outer edges touch. The dimensions
are as follows:
ID: 1-1/16
OD: 1-1/2
Pictures of the measurements are attached for verification purposes.
The washers were loose on the shaft, but I think the closer tolerance is going
to be on the OD side.
Olin K. Brimberry, PE
Principal Engineer
Office - 919.803.4274
Mobile - 919.522.1608
HunterBane Engineering, PLLC
PO Box 10314
Raleigh, NC 27605
3306 Alamance Drive
Raleigh, NC 27609
_______________________________________________
Archive: http://www.team.net/archive
http://autox.team.net/mailman/listinfo/healeys
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
<http://autox.team.net/pipermail/healeys/attachments/20170113/968bbdee/attachment.html>
|
