Mine runs .018 to .020.
Bill
----- Original Message -----
From: "Dan Cronin" <adcronin@mi.rr.com>
To: "FOT List Triumph" <fot@autox.team.net>; "Triumph List"
<triumphs@autox.team.net>
Sent: Tuesday, July 28, 2015 9:22 PM
Subject: [Fot] Uprated stub axle kit / shims
> Am putting the up-rated stub axle kit on my TR2 with TR6 front suspension
> / disc brakes and find that I need nearly 0.030 in shim thickness to allow
> the disk / wheel to turn without too much effort. The instructions say to
> start with 0.015 and then (usually) reduce to around 0.007 and then
> install the grease seal, inner bearing, spacer, shim pack, outer bearing,
> washer and nut torqued to 45â??50 â??#. Anyone else finding they need to use
> considerably more in the way of shims than the instructions indicate?
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/william.tobin31@verizon.net
>
>
>
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/mharc@autox.team.net
|