I have the National Part Number for the Pinion Seal but its in the shop.
I will have to retrieve it and send it on to you. Napa can cross reference.
As far as the side seals, I have only used the ones from the big 3. I
avoid these whenever I can as I have bent pullers, and hubs trying to
get these off. We have tried heat, impacts and no luck.
The only success I have had is with a bearing splitter and a 50 ton
press. You get a loud boom when they come apart. I generally use a
cushion, like a full trash can, below the press to catch the flying parts.
If anyone has a easier way to get these off please advise.
Glenn
On 3/4/2015 1:51 PM, Greg And Alison Blake via Fot wrote:
> Not sure what you call them. Anyone have a NAPA seal number for the seals for
> the stub axle flanges on the side of the IRS diff. There is one seal for each
> side of the diff. I got a TR6 diff on the shop floor that is leaking all
> over. Figured I'd replace them while it's easy.
>
>
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage: http://autox.team.net/mailman/options/fot/gaf3@charter.net
>
>
>
>
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|