We have a special tool, per Kas, and tap the seal segments home until we get
100% sealant flow at the bearing block seams.
When all is done per the book and using Chris Marx new Viton seal design,
there are a lot of happy people out there.
Joe Alexander
645 1st Street
Jesup, IA 50648
The-vintage-racer.com
Gasketinnovations.com
Cell: 319.464.4711
> On Jul 8, 2014, at 10:58 AM, Jeff Kelley <jeffreykelley@charter.net> wrote:
>
> The factory soaked the wool felt seals in shellac before they were driven
into place. Use only a small piece at a time and don't try to set the whole
seal in one shot.
>
> J Kelley
>
>
>> On Tue, Jul 8, 2014 at 11:35 AM, riverside@southslope.net wrote:
>>
>> I am putting together a motor and have been advised that it is
>> advantageous to replace the bcut up ropeb (still canbt get the
>> image of an elderly lady putting on panty hose out of my
>> mind) with squeezed in silicone sealant. Might a void form unknown
>> to the installer? If the rope is still best, what is the best gunkum
>> with which to soak it.
>>
>> Thanks for the access to your experience.
>>
>> art de armond
>> _______________________________________________
>> fot@autox.team.net
>>
>> http://www.fot-racing.com
>>
>> Donate: http://www.team.net/donate.html
>> Archive: http://www.team.net/archive
>> Forums: http://www.team.net/forums
>> Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/jeffreykelley@charter.net
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
http://autox.team.net/mailman/options/fot/n197tr4@cs.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|