See
http://www.tonydrews.com/uncle_jacks_engine_building_tips.htm
"Install guides if you are using the bronze
guides, they MUST have .004 stem clearance. The
shops take some convincing, but if clearance is
less in these old engines, the heat will cause
the guide to shrink and the valve to stick,
perhaps destroying the entire engine."
Tony Drews
At 07:20 AM 6/19/2014, Michael Moore wrote:
>Is there a recommended clearance for valve guides? I may have a valve
>sticking.
>
>Engine builder just put in oversized valves and new guides.
>
>
>Thanks
>Mike
>
>62 TR4, Race car
>63 TR4, Street car
>
>Mike & Becky Moore
>6050 Ruhl Road
>Fairview, PA 16415
>
>[demime 1.01d removed an attachment of type
>image/gif which had a name of image001.gif]
>_______________________________________________
>fot@autox.team.net
>
>http://www.fot-racing.com
>
>Donate: http://www.team.net/donate.html
>Archive: http://www.team.net/archive
>Forums: http://www.team.net/forums
>Unsubscribe/Manage:
>http://autox.team.net/mailman/options/fot/tony@tonydrews.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|