Greg, right you are. We raced the Group 44 GT6 MkIII in the mid-'70's
and it had a Porsche (believe it was Sachs) aluminum pressure plate. Ted
On 12/11/2013 11:38 PM, Gregmogdoc@surfnetusa.com wrote:
> I believe that "back in the day" Kas used a
> competition porsche 911s pressure plate in the TR-6
> because it had an aluminum "platen" an so was very
> light. It helped crankshaft life in the TR-6. Maybe
> Kas can fill in more details. Years ago, they were
> very expensive. They are probably no cheaper now!
> I have been using a pressure plate like a
> standard TR-6 on an aluminum flywheel for years with
> good success.
>
>
> Greg Solow
> The Engine Room
> Sports Car Specialists
> Santa Cruz, CA 95060
> 831 429-1800
>
>
>
> ------- Original Message -------
> >From : Tony Drews[mailto:tony@tonydrews.com]
> Sent : 12/6/2013 10:09:07 AM
> To : fot@autox.team.net
> Cc :
> Subject : RE: [Fot] Light pressure plates?
>
> So this discussion about harmonic balancers raised
> the issue of light
> flywheel / pressure plate. I've got a nice light
> flywheel, but am
> running the stock diaphragm pressure plate because I
> really disliked
> the engagement characteristics of the Tilton setup I
> originally had
> (it's a toggle switch, so backing off the trailer and
> driving around
> the paddock is challenging).
>
> Is there a pressure plate out there that directly
> replaces the stock
> one but is lighter? I saw one on the 'net that
> looked like it might
> be lighter, but it didn't give weight and the company
> didn't respond
> to my inquiry.
>
> Thanks in advance, Tony Drews
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/gregmogdoc@surfnetusa.com
> _______________________________________________
> fot@autox.team.net
>
> http://www.fot-racing.com
>
> Donate: http://www.team.net/donate.html
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/fot/tedtsimx@bright.net
>
>
>
>
--
Ted Schumacher
tedtsimx@bright.net
http://www.tsimportedautomotive.com
108 S. Jefferson St.
Pandora, Ohio, USA 45877
Fax: 419.384.3272 (24 Hrs.)
Phone: 800.543.6648 (US & Canada)
Tech/ Gen. Information/ Worldwide: 419.384.3022
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|