fot (date)

fot (date)

[Thread Index] [Top] [All Lists]

November 30, 2013

Re: [Fot] RA-DVD, Joe Alexander, 18:32
[Fot] RA-DVD, Bruce Lapierre, 18:07
Re: [Fot] Shot peening, riverside, 13:32
Re: [Fot] Shot peening, Marty, 12:58
Re: [Fot] Shot peening, Bud R, 12:06
Re: [Fot] Shot peening, Jim Gray, 10:22
Re: [Fot] Shot peening, TeriAnn J. Wakeman, 10:08
Re: [Fot] Shot peening, J. Wagner, 10:01
[Fot] Got Pistons......thanks!, Joe Alexander, 09:52
Re: [Fot] Shot peening, J. Wagner, 09:30
[Fot] Shot peening, Marty, 09:02

November 29, 2013

Re: [Fot] Pistons.....new or good used. 87mm TR4. Wanted, Tim Murphy, 20:32
[Fot] Pistons.....new or good used. 87mm TR4. Wanted, Joe Alexander, 20:21
Re: [Fot] TR250/TR6 pedal box and inner steering column from a TR4/TR250/TR6 needed for TR4 Lemons racer, Bill Tobin, 19:49

November 28, 2013

Re: [Fot] The Bigger Picture, Andy Packard, 10:32
Re: [Fot] The Bigger Picture, Bud R, 09:15
Re: [Fot] The Bigger Picture, billdentin, 08:40
Re: [Fot] KCup 2013 DVD, MadMarx, 05:57

November 27, 2013

[Fot] Happy Thanksgiving, Mark J Bradakis, 14:34
Re: [Fot] KCup 2013 DVD, Joe Alexander, 13:00
Re: [Fot] KCup 2013 DVD, MadMarx, 12:50
Re: [Fot] KCup 2013 DVD, BillDentin, 12:47
Re: [Fot] KCup 2013 DVD, MadMarx, 12:37
Re: [Fot] bushed bell crank, Tim Murphy, 11:49
Re: [Fot] bushed bell crank, Joe Alexander, 10:54
Re: [Fot] bushed bell crank, Tim Murphy, 10:44
[Fot] Thanksgiving, Robert Deanes, 09:45
Re: [Fot] bushed bell crank, davehogye, 09:19
[Fot] bushed bell crank, Dave Hogye, 09:09
Re: [Fot] Gasket sealer, Bill Tobin, 08:18
Re: [Fot] The Big Picture, BillDentin, 07:35
Re: [Fot] H6 Pivot and Bell crank Moss# 371-440 and 371-420, Mike Moore, 05:01
[Fot] Gasket sealer, Mike Moore, 04:56

November 26, 2013

Re: [Fot] H6 Pivot and Bell crank Moss# 371-440 and 371-420, Tim Murphy, 21:13
[Fot] H6 Pivot and Bell crank Moss# 371-440 and 371-420, Mike Mehl, 20:52
Re: [Fot] The Big Picture: List Archives, steve, 18:09
Re: [Fot] The Big Picture, Duncan Charlton, 14:27
Re: [Fot] The Big Picture, TeriAnn J. Wakeman, 13:34
[Fot] The Big Picture, Edward Dunn, 12:37
Re: [Fot] Gasket Seal, Glenn Franco, 10:57
Re: [Fot] Gasket Seal, Bud R, 10:50
Re: [Fot] Gasket Seal/cracked housings, fubog1, 10:47
Re: [Fot] Gasket Seal, Van Mulders Marcel, 10:38
Re: [Fot] Gasket Seal, gasket . works, 09:06
Re: [Fot] Gasket Seal, Tony and Annie Garmey, 08:36
Re: [Fot] Gasket Seal, Peter Vucinic, 05:27
Re: [Fot] Gasket Seal, Vince G, 04:55
[Fot] Gasket Seal, Mike Moore, 04:28

November 25, 2013

Re: [Fot] KCup 2013. Video Trailer is now on the-vintage-racer.com website...., Joe Alexander, 15:43
Re: [Fot] KCup 2013. Video Trailer is now on the-vintage-racer.com website...., Ken Suhre, 15:10
Re: [Fot] engaging/disengaging the overdrive?, Robert Deanes, 11:28
Re: [Fot] engaging/disengaging the overdrive?, Tony Drews, 10:58
Re: [Fot] engaging/disengaging the overdrive?, Chuck Arnold and/or Kathleen Kelley, 10:07
Re: [Fot] engaging/disengaging the overdrive?, Scott Janzen, 10:07
Re: [Fot] engaging/disengaging the overdrive?, john hasty, 10:05
[Fot] engaging/disengaging the overdrive?, Scott Janzen, 09:55
Re: [Fot] OD units available, Larry Young, 08:48

November 24, 2013

Re: [Fot] A-Type O/D Issue, fogbro1, 21:05
Re: [Fot] [6pack] A-Type O/D Issue, Mark J Bradakis, 20:26
Re: [Fot] [6pack] A-Type O/D Issue, fogbro1, 20:14
[Fot] Christian Marx to be featured in Burt Levy's next VMS Column, Joe Alexander, 19:09
Re: [Fot] OD units available, Steve Yott, 16:18
Re: [Fot] [6pack] A-Type O/D Issue, Glenn Franco, 15:48
Re: [Fot] OD units available, Guy Morter, 15:02
Re: [Fot] OD units available, sherry robyn, 13:26
[Fot] OD units available, Joe Alexander, 12:43
Re: [Fot] A-Type O/D Issue, Steve Yott, 11:38
[Fot] A-Type O/D Issue, Glenn Franco, 09:20

November 23, 2013

[Fot] FS: TR-powered Morgan race car, Duncan Charlton, 13:51
[Fot] torque angle, riverside, 11:23
Re: [Fot] Today -nothing to do with triumphs at all., Bill Tobin, 06:47

November 22, 2013

[Fot] Today -nothing to do with triumphs at all., Mordy, 20:33
Re: [Fot] torque angle, Spitfire Racing, 15:13
[Fot] torque angle, riverside, 14:18

November 21, 2013

[Fot] Empty trailer notice, Greg And Alison Blake, 18:38
Re: [Fot] Garage space, Greg And Alison Blake, 17:30
[Fot] Garage space, John Frymark, 12:18

November 20, 2013

Re: [Fot] TR-4 / TR-6 tranny layshaft bearing mod?, Bruce Lapierre, 21:26
Re: [Fot] Who is Jim Cox?, Bob Kramer, 17:42
Re: [Fot] TR-4 / TR-6 tranny lay shaft bearing mod?, Peter Vucinic, 16:51
[Fot] 1300 block, Dale, 16:20
Re: [Fot] 2014 Kastner Cup information-Press release, MadMarx, 13:35
Re: [Fot] 2014 Kastner Cup information-Press release, rkramer3, 13:20
Re: [Fot] 2014 Kastner Cup information-Press release, Chuck Arnold and/or Kathleen Kelley, 11:15
Re: [Fot] 2014 Kastner Cup information-Press release, davehogye, 09:02
[Fot] KCup 2013. Video Trailer is now on the-vintage-racer.com website...., Joe Alexander, 07:29

November 19, 2013

Re: [Fot] 2014 Kastner Cup information-Press release, The Fooddude, 21:26
Re: [Fot] 2014 Kastner Cup information-Press release, Tony Drews, 21:17
Re: [Fot] TR6 with Halkias team fenders on EBay, davehogye, 21:01
[Fot] TR6 with Halkias team fenders on EBay, Dave Hogye, 20:46
Re: [Fot] 2014 Kastner Cup information-Press release, Greg And Alison Blake, 20:30
Re: [Fot] Rear lift hook TR3A, Bruce Lapierre, 20:09
Re: [Fot] 1" x 23 spline clutch disk?, Mark J Bradakis, 19:41
Re: [Fot] 1" x 23 spline clutch disk?, John Hasty, 19:39
Re: [Fot] Rear lift hook TR3A, rdavis4, 18:56
Re: [Fot] Rear lift hook TR3A, rdavis4, 18:56
[Fot] Rear lift hook TR3A, Todd Redmond, 18:53
Re: [Fot] 2014 Kastner Cup information-Press release, Joe Alexander, 18:42
[Fot] 1" x 23 spline clutch disk?, Tony Drews, 18:22
[Fot] 2014 Kastner Cup information-Press release, rkramer3, 17:36
Re: [Fot] Thompson Speedway progress pictures, Jaxon Racing, 16:22
Re: [Fot] TR-4 / TR-6 tranny layshaft bearing mod?, Larry Young, 14:02
Re: [Fot] TR-4 / TR-6 tranny layshaft bearing mod, Enquiries Road & Track, 13:52
[Fot] Who is Jim Cox?, rkramer3, 12:21
Re: [Fot] TR-4 / TR-6 tranny layshaft bearing mod?, Tony Drews, 11:13
Re: [Fot] TR-4 / TR-6 tranny layshaft bearing mod?, Van Mulders Marcel, 11:13
[Fot] Who is Jim Cox?, Bob Kramer, 10:58
Re: [Fot] TR-4 / TR-6 tranny layshaft bearing mod?, John Wagner, 10:57
Re: [Fot] Thompson Speedway progress pictures, George Harmuth, 06:54

November 18, 2013

Re: [Fot] Thompson Speedway progress pictures, Jaxon Racing, 21:56
Re: [Fot] A-Type O/D Conversion Shift Tower Issue, Randall, 16:39
Re: [Fot] TR-4 / TR-6 tranny layshaft bearing mod?, Geoff Byrne, 11:57
Re: [Fot] TR-4 / TR-6 tranny layshaft bearing mod?, Steve Yott, 11:56
Re: [Fot] Thompson Speedway progress pictures, George Harmuth, 08:39
[Fot] Thompson Speedway progress pictures, George Harmuth, 07:07

November 17, 2013

Re: [Fot] Fwd: Kastner Cup 2013 DVD Video Teaser File, Bruce Lapierre, 18:48
Re: [Fot] Fwd: Kastner Cup 2013 DVD Video Teaser File, Bill Babcock, 17:36
[Fot] Fwd: Kastner Cup 2013 DVD Video Teaser File, Joe Alexander, 15:45
Re: [Fot] A-Type O/D Conversion Shift Tower Issue, Steve Yott, 15:29
Re: [Fot] TR-4 / TR-6 tranny layshaft bearing mod?, Enquiries Road & Track, 15:20
[Fot] A-Type O/D Conversion Shift Tower Issue, Glenn Franco, 15:14
[Fot] TR-4/6 tranny - 16 vs 17 tooth layshaft, Tony Drews, 14:13
Re: [Fot] wheel spacer, Joe Alexander, 08:06
[Fot] wheel spacer, REK46, 07:20
Re: [Fot] TR-4 synchro rings, Peter Vucinic, 05:22
Re: [Fot] TR-4 / TR-6 tranny layshaft bearing mod?, Peter Vucinic, 05:21
Re: [Fot] TR-4 / TR-6 tranny layshaft bearing mod?, Geoff Byrne, 00:19

November 16, 2013

Re: [Fot] TR-4 / TR-6 tranny layshaft bearing mod?, Chuck Gee, 23:13
Re: [Fot] TR-4 / TR-6 tranny layshaft bearing mod?, Steve Yott, 21:57
Re: [Fot] TR-4 / TR-6 tranny layshaft bearing mod?, Jerry Van Vlack, 21:50
Re: [Fot] TR-4 / TR-6 tranny layshaft bearing mod?, Stutzmans, 20:16
Re: [Fot] TR-4 / TR-6 tranny layshaft bearing mod?, Stutzmans, 18:40
[Fot] Kastner Cup 2013 DVD By John Seaman Productions., Joe Alexander, 16:20
[Fot] Fot] Road America & the K Cup race....DVD available by next week., Joe Alexander, 13:07
[Fot] Road America & the K Cup race, Kas Kastner, 12:45
Re: [Fot] TR-4 / TR-6 tranny layshaft bearing mod?, fubog1, 11:03
Re: [Fot] TR-4 / TR-6 tranny layshaft bearing mod?, Randy and Valerie DeRuiter, 10:45
Re: [Fot] TR-4 / TR-6 tranny layshaft bearing mod?, yellow04, 09:02
[Fot] TR-4 synchro rings, Tony Drews, 09:01
Re: [Fot] TR-4 / TR-6 tranny layshaft bearing mod?, Joe Alexander, 07:59
[Fot] TR-4 / TR-6 tranny layshaft bearing mod?, Tony Drews, 07:47

November 13, 2013

Re: [Fot] 2015 Kastner Cup, horizonracing, 16:08
[Fot] 2015 Kastner Cup, Joe Alexander, 13:37
Re: [Fot] SU Rebuilder, The Fooddude, 01:49

November 12, 2013

Re: [Fot] Reproduction Steering Racks, Marty, 18:18
Re: [Fot] SU Rebuilder, Jim Norlin, 12:36
Re: [Fot] Reproduction Steering Racks - INFO NEEDED, TR4 Tony, 11:57
Re: [Fot] Reproduction Steering Racks - INFO NEEDED, Chuck WATSON, 11:53
Re: [Fot] Reproduction Steering Racks - INFO NEEDED, Christian Marx, 11:40
Re: [Fot] Reproduction Steering Racks - INFO NEEDED, TR4 Tony, 11:37
Re: [Fot] Reproduction Steering Racks - INFO NEEDED, TR4 Tony, 11:36
Re: [Fot] Reproduction Steering Racks - INFO NEEDED, Joe Alexander, 11:27
Re: [Fot] Reproduction Steering Racks - INFO NEEDED, Chuck WATSON, 10:59
Re: [Fot] SU Rebuilder, jameselbe, 10:38
Re: [Fot] SU Rebuilder, Bill Tobin, 08:06
Re: [Fot] SU Rebuilder, Duncan Charlton, 06:45
Re: [Fot] SU Rebuilder, rdavis4, 04:31
Re: [Fot] GT6 Crankshaft, TR4 Tony, 01:39

November 11, 2013

Re: [Fot] SU Rebuilder, Sam Halkias, 21:34
Re: [Fot] SU Rebuilder, davehogye, 21:02
[Fot] Subject: Re: TR4 Pinion bearing assembly question, Catpusher, 20:57
Re: [Fot] GT6 Crankshaft, John Hasty, 15:56
Re: [Fot] GT6 Crankshaft, Scott Janzen, 15:36
Re: [Fot] SU Rebuilder, Jim Norlin, 15:12
Re: [Fot] GT6 Crankshaft, Barr, Scott, 15:11
Re: [Fot] GT6 Crankshaft, Jeff Clark, 15:08
Re: [Fot] SU Rebuilder, Sam Halkias, 14:53
Re: [Fot] SU Rebuilder, John Hasty, 14:15
Re: [Fot] SU Rebuilder, Scott Janzen, 14:05
Re: [Fot] GT6 Crankshaft, Scott Janzen, 14:02
Re: [Fot] Reproduction Steering Racks, Marty, 13:52
[Fot] SU Rebuilder, Todd Redmond, 13:51
Re: [Fot] Reproduction Steering Racks, Greg And Alison Blake, 13:04
Re: [Fot] Reproduction Steering Racks, vandecarr, 12:48
[Fot] Clark Lincoln, Jeff Clark, 12:47
[Fot] GT6 Crankshaft, Jeff Clark, 12:36
Re: [Fot] Lap timing devices, Bill Babcock, 09:28
Re: [Fot] Lap timing devices, Scott Janzen, 08:27

November 10, 2013

[Fot] Online machine shop, Greg And Alison Blake, 18:49
[Fot] TR6 Trans on a GT6: Follow up Question, Chuck WATSON, 15:48
Re: [Fot] Lap timing devices, Bill Babcock, 13:09

November 09, 2013

Re: [Fot] TR4 Pinion bearing assembly question, Randall, 17:02
[Fot] Commercial Content. Gasketinnovations.com, Joe Alexander, 16:16
Re: [Fot] TR4 Pinion bearing assembly question, Scott Janzen, 14:27
Re: [Fot] TR4 Pinion bearing assembly question, Mark J Bradakis, 13:05
[Fot] TR4 Pinion bearing assembly question, Scott Janzen, 12:38
Re: [Fot] Lap timing devices, jason, 11:19
Re: [Fot] Lap timing devices, jason, 11:19
Re: [Fot] Reproduction Steering Racks, John Hasty, 10:50
Re: [Fot] Reproduction Steering Racks, TeriAnn J. Wakeman, 10:15
Re: [Fot] Reproduction Steering Racks, Bill Babcock, 09:43
Re: [Fot] Reproduction Steering Racks, Marty, 07:24
Re: [Fot] Reproduction Steering Racks, TR4 Tony, 02:42
Re: [Fot] Reproduction Steering Racks, TR4 Tony, 02:42

November 08, 2013

Re: [Fot] Reproduction Steering Racks, Mark Vaden, 22:19
Re: [Fot] Reproduction Steering Racks, EDWARD BARNARD, 21:59
Re: [Fot] Reproduction Steering Racks, Allen Washatko, 21:12
Re: [Fot] Reproduction Steering Racks, Tony Drews, 20:39
Re: [Fot] Lap timing devices, Duncan Charlton, 20:19
Re: [Fot] Reproduction Steering Racks, John Hasty, 19:41
Re: [Fot] Reproduction Steering Racks, Robert M. Lang, 19:05
Re: [Fot] Lap timing devices, John Hasty, 17:31
Re: [Fot] Lap timing devices, christopher bock, 17:28
Re: [Fot] Lap timing devices, Bill Babcock, 17:07
Re: [Fot] Lap timing devices, Bobby Whitehead, 16:03
[Fot] Lap timing devices, Scott Janzen, 14:39
Re: [Fot] Reproduction Steering Racks, Tony Drews, 12:37
Re: [Fot] Reproduction Steering Racks, TR4 Tony, 12:07
Re: [Fot] what's a TR3 sell for?, Scott Janzen, 11:43
Re: [Fot] what's a TR3 sell for?, R. John Lye, 11:41
[Fot] what's a TR3 sell for?, Scott Janzen, 10:50

November 07, 2013

Re: [Fot] New Vertical Links, Bill Babcock, 19:19
[Fot] New Vertical Links, Robert M. Lang, 18:54
[Fot] TR4 Interior, Mike Moore, 17:59
Re: [Fot] Cold Air intake on a Spitfire, Randall, 17:57
Re: [Fot] Quick Spitfire question, Glenn Franco, 16:15
[Fot] Air boxes, Kas Kastner, 13:19
Re: [Fot] Cold Air intake on a Spitfire, BillDentin, 12:21
Re: [Fot] Quick Spitfire question, Mark J Bradakis, 11:54
Re: [Fot] Cold Air intake on a Spitfire, George Harmuth, 11:09
[Fot] Quick Spitfire question, Peter Caldwell, 11:08
Re: [Fot] Cold Air intake on a Spitfire, Tony Drews, 10:51
Re: [Fot] Kastner Brophy GT6, Robert MacKenzie, 07:15
Re: [Fot] Reproduction Steering Racks, TR4 Tony, 07:13
Re: [Fot] Reproduction Steering Racks, Greg And Alison Blake, 07:00
Re: [Fot] Reproduction Steering Racks, Chuck WATSON, 06:27
[Fot] Reproduction Steering Racks, TR4 Tony, 06:02

November 06, 2013

Re: [Fot] TR3 Prices, Don TR, 19:31
Re: [Fot] Kastner Brophy GT6, Robert M. Lang, 19:15
Re: [Fot] The Best GT6 (arguably), Robert M. Lang, 19:13
Re: [Fot] The Best GT6 (arguably), Robert M. Lang, 19:10
Re: [Fot] TR3 Prices, Duncan Charlton, 18:51
[Fot] The Best GT6 (arguably), jason, 18:09
[Fot] The Best GT6 (arguably), jason, 18:08
Re: [Fot] TR3 Prices, Bill Redinger, 17:06
Re: [Fot] Oil comparo, john hasty, 15:30
Re: [Fot] TR3 Prices, Don TR, 15:15
Re: [Fot] TR3 Prices, BillDentin, 14:46
[Fot] Cold Air intake on a Spitfire, George Harmuth, 13:58
Re: [Fot] TR3 Prices, J. Wagner, 13:19
[Fot] Oil comparo, Duncan Charlton, 10:23
Re: [Fot] TR3 Prices, Duncan Charlton, 10:16
Re: [Fot] TR3 Prices, John Frymark, 08:40
Re: [Fot] TR3 Prices, RACER BUD, 08:28
[Fot] TR3 Prices, John Frymark, 07:58
Re: [Fot] TR3 Prices, Bill Redinger, 07:40
[Fot] TR3 Prices, mrcpt1@sbcglobal.net, 05:49

November 05, 2013

Re: [Fot] TR3 Prices, Bruce Lapierre, 20:48
Re: [Fot] TR3 Prices, Edward Dunn, 20:01
Re: [Fot] TR3 Prices, Dave, 19:34
Re: [Fot] TR3 Prices, Dave, 19:19
Re: [Fot] TR3 Prices, Randall, 18:18
Re: [Fot] TR3 Prices, steve, 16:32
Re: [Fot] TR3 Prices, Bill Redinger, 13:22
Re: [Fot] TR3 Prices, Jeff Kelley, 12:58
Re: [Fot] TR3 Prices, Don TR, 10:54
[Fot] TR3 Prices, Richard Gehweiler, 10:36
Re: [Fot] Exhaust Header, john hasty, 10:36
Re: [Fot] Photos of my racing of the year 2013, Robert Deanes, 06:34
Re: [Fot] Exhaust Header, Van Mulders Marcel, 03:06
Re: [Fot] Exhaust Header, gregmogdoc@surfnetusa.com, 02:13

November 04, 2013

[Fot] Calling Dave Belden, Spitfire Racing, 14:29
Re: [Fot] Lever shock rebuilds, Greg And Alison Blake, 13:03
Re: [Fot] 1147 Spitfire Exhaust Valves, Duane Bailey, 12:46
Re: [Fot] 1147 Spitfire Exhaust Valves, Charly Mitchel, 11:23
[Fot] 1147 Spitfire Exhaust Valves, Robert MacKenzie, 09:22

November 03, 2013

Re: [Fot] Photos of my racing of the year 2013, John Hasty, 14:54
[Fot] Photos of my racing of the year 2013, MadMarx, 10:33
[Fot] Empty Trailer, Marty, 10:13
Re: [Fot] Lever shock rebuilds, John Hasty, 07:42
[Fot] K-Cup shirts, christopher bock, 07:13
[Fot] Fwd: No. 14A, Bob Kramer, 07:09

November 02, 2013

Re: [Fot] Lever shock rebuilds, Mark J Bradakis, 23:20
Re: [Fot] Lever shock rebuilds, davehogye, 21:59
Re: [Fot] Lever shock rebuilds, Irv Korey, 21:45
Re: [Fot] First race video, Joe Alexander, 20:47
Re: [Fot] First race video, Bruce Lapierre, 20:08
Re: [Fot] Lever shock rebuilds, Bruce Lapierre, 20:07
Re: [Fot] Lever shock rebuilds, Bruce Lapierre, 20:07
Re: [Fot] SVRA at CotA -- photos and article, FoodDude, 19:48
Re: [Fot] Lever shock rebuilds, Joe Alexander, 19:01
[Fot] Lever shock rebuilds, Greg And Alison Blake, 18:50
[Fot] First race video, Dave Hogye, 18:47
Re: [Fot] tr 3 front cross tube, Todd Redmond, 11:28
[Fot] tr 3 front cross tube, KENMUN, 10:21
Re: [Fot] Need TR3a front bumper bar and front apron for my 1958 TR3A, Bruce Lapierre, 09:06
[Fot] Nitriding Camshafts, Marty, 08:32

November 01, 2013

Re: [Fot] Header, john hasty, 13:13