If there is flexing of the wire near the connection I think a crimp is
better due to the solder connection making the wire very stiff at the
connection and the flexing will tend to break the wire at that point. The
key to a good crimp connection is to use a good "industrial" crimper, not
the one typically found on a wire strippers. FWIW
Tim
-----Original Message-----
From: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] On
Behalf Of Christopher Bock
Sent: Wednesday, August 07, 2013 2:13 PM
To: FoTTriumph
Subject: [Fot] Electric connections
Amici
What is the best practice for electric connections, crimp or solder?
Chris
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
http://autox.team.net/mailman/options/fot/timmurph@fastbytes.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
|