It is amazing as to how much pressure that little pump in the A-type can
generate..... I wound out an 800 lb gauge before I could shut it down!!
PS. It will also BEND parts in the overdrive if it does this..... Ouch!
Steve Yott
-----Original Message-----
From: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] On
Behalf Of Randall
Sent: Friday, November 09, 2012 6:55 PM
To: 'Friends'
Subject: Re: [Fot] J-tpe OD enhancements for racing
> Care must be taken to not shim the spring too much as the spring will
> not allow the piston to clear the relief hole at the end of the
> travel. The result is disaster! Don't ask how I know.
You too, huh? Just to expand a bit, make sure there is enough travel before
coil bind to fully uncover the relief hole (or holes). The pressure was
fine on the bench ...
Randall
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/fot/tr4@wi.rr.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/fot/mharc@autox.team.net
|