Re: [Fot] J-tpe OD enhancements for racing

["Randall" <TR3driver@ca.rr.com>]

> Care must be taken to not shim the spring too much as the spring will not
> allow the piston to clear the relief hole at the end of the travel. The
> result
> is disaster! Don't ask how I know. 

You too, huh?  Just to expand a bit, make sure there is enough travel before
coil bind to fully uncover the relief hole (or holes).  The pressure was
fine on the bench ...

Randall
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Archive: http://www.team.net/archive
Unsubscribe: http://autox.team.net/mailman/options/fot/mharc@autox.team.net