Re: [Fot] FP Reg

["Tim Murphy" <timmurph@fastbytes.com>]

Fuel Pressure Regulator - Holley  Part No. 12-803 (included with pump)
Pressure range 4-1/2 to 9 psi
      Set to 3-1/4 to 3-1/2 PSI

Fuel Pump - Holley "Blue" Part No. 12-802-1  (70 gph at 9 psi, preset
pressure 14 psi)

Fuel Filter - Fram HPG-1

Carburetors - SU Type H6

This was all at the suggestion of Uncle Jack and Tony when we built the car.
The fuel pressure has always been rock solid.  I think we may have dropped
the pressure to a bit under 3 PSI.  I'll have to take a look when I get the
engine together and back in the car running.

Tim & Ryan

-----Original Message-----
From: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] On
Behalf Of John Hasty
Sent: Monday, May 28, 2012 12:06 PM
To: Friends of Triumph
Subject: [Fot] FP Reg

What kind of fuel pressure reg. are you all using?  I am now on the 2nd
Holly
and with it set @ 3lbs in the pits, it moves from 2 to 8 out on the track
when
we tested Friday.  At anything over 3 I get a stutter coming on the gas out
of
the slower turns.
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe:
http://autox.team.net/mailman/options/fot/timmurph@fastbytes.com
_______________________________________________
fot@autox.team.net

http://www.fot-racing.com

Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: 
http://autox.team.net/mailman/options/fot/fot-archive@autox.team.net