Does anyone have similar information on a TR2/3/4 head? This is handy info
when trying to determine how much has been taken off previously and also the
approximate compression ratio. I get asked this a lot. If I'm not
mistaken, the high port heads started out around 3.30" but not sure.
Mike
-----Original Message-----
From: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net]On
Behalf Of Charly Mitchel
Sent: Thursday, August 04, 2011 11:24 AM
To: fot@autox.team.net
Subject: [Fot] Fw: [CWE] 6 cylinder head
6 cylinder head info
Charly Mitchel
----- Original Message -----
From: "Mark J Bradakis" <mark@bradakis.com>
To: <cwe@autox.team.net>
Sent: Thursday, June 16, 2011 7:12 PM
Subject: Re: [CWE] 6 cylinder head
> The columns probably won't line up properly when this is sent
> out. Sorry.
>
> mjb.
>
>
>
> Application CR Thickness CC depth CC volume
>
>
> GT6 Mk I 9.50
> GT6+ 9.25 3.450 0.425 34
> GT6 Mk III 9.25 3.32 .47 37
> (early)
> GT6 Mk III 8.0 3.40 .55 44
> (late)
> TR250, TR6 8.5 3.55 .60 48.5
> TR6 middle 7.75 3.54 .68 55
> TR6 late 7.5 3.55 .70 57
> TR6 race 1 10.25 3.375 .52 41.6
> TR6 race 2 12.3 3.295 .44 33
> GT6 race 1 10.75 3.31 .385 30
> GT6 race 2 12.75 3.22 .300 24.4
>
>
> _______________________________________________
> Cwe mailing list
> Cwe@autox.team.net
>
> Donate: http://www.team.net/donate.html
>
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/cwe/charly@mitchelplumbing.com
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
Unsubscribe: http://autox.team.net/mailman/options/fot/mdhado@comcast.net
_______________________________________________
fot@autox.team.net
http://www.fot-racing.com
Donate: http://www.team.net/donate.html
Archive: http://www.team.net/archive
Forums: http://www.team.net/forums
|