Call Quantum Mechanics and get them from him.
Good quality parts from a guy who knows good from bad.
NIL and all that stuff.
JVV
----- Original Message -----
From: "Larry Young" <cartravel@pobox.com>
To: <jeff_durant@comcast.net>
Cc: "FOT" <fot@autox.team.net>
Sent: Tuesday, February 02, 2010 11:15 AM
Subject: Re: [Fot] TR3/4/5/6 Syncro Cups
> Jeff,
> I don't see any other responses, so I'll give it a shot.
>
> Sam Clark and I noted this problem in our transmission rebuild articles
> at vtr.com. This is a case where new is not always better. I measure
> them first and reuse them if they are not worn out. If you have to
> replace them, Victoria British seems to have the worst ones. The ones
> from the other dealers are usable, but worse than the originals. This is
> based on experience from a few years back. I have not tried the premium
> ones. They must be relatively new. I have bought NOS sychro rings on
> ebay.
> Larry
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.96
http://www.fot-racing.com
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
Brought to you by Team.Net consulting - Unix software specialist.
|