Jeff,
I don't see any other responses, so I'll give it a shot.
Sam Clark and I noted this problem in our transmission rebuild articles
at vtr.com. This is a case where new is not always better. I measure
them first and reuse them if they are not worn out. If you have to
replace them, Victoria British seems to have the worst ones. The ones
from the other dealers are usable, but worse than the originals. This is
based on experience from a few years back. I have not tried the premium
ones. They must be relatively new. I have bought NOS sychro rings on
ebay.
Larry
jeff_durant@comcast.net wrote:
> I'm rebuilding a CR gearbox for my TR6 using a Kastner gearset and realized I
>used my last factory syncro cups on another CR gearbox build. Who offers the
>best (closest to factory) syncro cups for the big TR's these days? I've tried
>Moss cups I'm my brother's TR4A trans rebuild and they were marginal. Anyone
>tried the TRF or Rimmer's premium ones?
> Thanks,
> Jeff D.
> TR6 #12
> Sent via BlackBerry by AT&T
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> Suggested annual donation $12.96
>
> You are subscribed as cartravel@pobox.com
>
> http://www.fot-racing.com
>
>
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
>
> Brought to you by Team.Net consulting - Unix software specialist.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.96
http://www.fot-racing.com
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
Brought to you by Team.Net consulting - Unix software specialist.
|