Or an NPT fitting and use an adaptor to AN. It's easier to find a tap,
that way.
Scott
-----Original Message-----
From: fot-bounces@autox.team.net [mailto:fot-bounces@autox.team.net] On
Behalf Of Jim Gray
Sent: Thursday, January 14, 2010 12:14 AM
To: Mike Mehl
Cc: Triumph Friends of
Subject: Re: [Fot] TR4 accusump plumbing
Yes but you have to drill and tap for a -8 or -10 fitting
Jim g
Sent from my iPhone
On Jan 13, 2010, at 10:08 PM, Mike Mehl <mike.mehl@yahoo.com> wrote:
> Can the accusump be plumbed into one of the oil galley ports on the
> side of
> the engine?
> _______________________________________________
>
> Support Team.Net http://www.team.net/donate.html
>
> Suggested annual donation $12.96
>
> You are subscribed as toodamnfunky@comcast.net
>
> http://www.fot-racing.com
>
>
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
>
> Brought to you by Team.Net consulting - Unix software specialist.
Suggested annual donation $12.96
You are subscribed as scott.barr@mccarty-law.com
http://www.fot-racing.com
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
Brought to you by Team.Net consulting - Unix software specialist.
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Suggested annual donation $12.96
http://www.fot-racing.com
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
Brought to you by Team.Net consulting - Unix software specialist.
|