fot
[Top] [All Lists]

Re: [Fot] Question on Accusump Install with External Oil Lines On a

To: "Rocky Entriken" <rocky@spitfire4.com>
Subject: Re: [Fot] Question on Accusump Install with External Oil Lines On a
From: Bill Babcock <Billb@bnj.com>
Date: Wed, 4 Feb 2009 19:50:01 -1000
That is certainly the normal and easiest way to connect an accusump,  
but not necessarily the best. Supplying oil directly to the oil  
galleries seems to have substantially improved the reliability and  
lifespan of my engines--it means my engines always have at least 50 or  
more pounds of pressure in the oil gallery--even at startup.

Not only is the plumbing greatly simplified, but in measuring the  
gallery oil pressure on my TR3 engine I still saw great variation in  
pressure with RPM that you don't see with the accusump directly  
connected. I could come up with lots of scenarios that would cut oil  
pressure with an accusump connected to a remote filter or cooler line,  
but only one with a direct gallery connection.

Bottom line, if you're going to go to the expense and added  
complication of using an accusump you should get the most value out of  
it. Going through an oil filter adapter plate doesn't seem to do that  
for me. I'd like to protect against catastrophes like having that  
filter rupture or come unscrewed and still having bearing oil pressure  
long enough to get the motor shut down.


On Feb 4, 2009, at 3:05 PM, Rocky Entriken wrote:

> Same here, on my 1147 engine ... a simple double-male fitting into  
> the oil filter adapter (on the side of the block) and a tee right  
> there. The line is the one coming from the cooler and the stem of  
> the tee is the line going to the Accusump so what goes into the  
> Accusump is clean, cool oil.
>
> And then ... you screw that one in first, the short line reaching to  
> the oil filter second. :-)
>
> --Rocky Entriken
>
> ----- Original Message ----- From: "Brad Kahler" <brad.kahler@141.com>
> To: <fot@autox.team.net>
> Sent: Wednesday, February 04, 2009 5:47 PM
> Subject: Re: [Fot] Question on Accusump Install with External Oil  
> Lines On a Spitfire
>
>
>> On Susan's 1300 engine we have a remote oil filter adapter that we  
>> have T'eed into for the Accusump.  This gives us a large diameter  
>> all the way into the oil gallery passages.
>>
>> Brad
_______________________________________________
Support Team.Net http://www.team.net/donate.html

http://www.fot-racing.com

Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot

<Prev in Thread] Current Thread [Next in Thread>