fot
[Top] [All Lists]

Re: [Fot] Weber carbs

To: George Harmuth <harmug@us.ibm.com>
Subject: Re: [Fot] Weber carbs
From: Bill Babcock <Billb@bnj.com>
Date: Thu, 30 Oct 2008 21:41:58 -0700
First of all, sidedraft webers are as common as bellybuttons in racing  
applications. Usually as one throat per cylinder.  Downdraft  
conversions are common for street cars because they are usually  
designed for a single carb and it's a cheaper approach. A pair of side  
draft webers and a manifold is a bunch of bucks.

The good news with Webers is that they are almost infinitely  
adjustable. The bad news is that they are infinitely adjustable. If  
you run webers for long you will become more expert on them that just  
about any other part of your car, and you will have a vast collection  
of little brass thingies that cost way too much money for each bit.

The choke size is adjustable so big is good--it lets you sleeve down  
(or up) to the size you need. 45 mm (45DCOE) is very common but few  
LBCs actually run that size, and you can generally tell which ones  
they are by the huge stumble coming off the idle jet. The largest  
venturi for a 45DCOE carb is 45mm, but in actual use most have choke  
venturis that take them down to 38mm or so.

You can spend a lot of time working on your webers, and there's  
horsepower hidden in all those parts, but it's a lot easier to set up  
a set of SU's. But I'll take Webers any day.

On Oct 30, 2008, at 11:59 AM, George Harmuth wrote:

> I have a carb question, I was just offered a Weber side draft carb,  
> I don't
> know the number off hand, for my 72 street Spitfire. I see lots of
> conversions to a Weber downdraft carb but very few for the sidedraft  
> type.
> In theory, a sidedraft seems like a more efficient flow into the  
> engine, no
> right angle turns. Is there some reason weber sidedrafts aren't that
> common? Am I better replacing the single Stromberg with a spare pair  
> of SUs
> from my racing spit or the sidedraft  Weber? Are there clearance or
> mounting issues with the Weber?
>
> thanks
> mike
>
> G. Michael Harmuth
> Software Engineer
> _______________________________________________
> Support Team.Net http://www.team.net/donate.html
>
> http://www.fot-racing.com
>
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
>

Bill Babcock
Babcock & Jenkins
Billb@bnj.com
503.936.7660
www.bnj.com

Editor
Ke Nalu e-Magazine
Paddlesurfing's Web Journal

Bill@kenalu.com
www.kenalu.com
blog: www.ponohouse.com/ponoblog
_______________________________________________
Support Team.Net http://www.team.net/donate.html

http://www.fot-racing.com

Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot

<Prev in Thread] Current Thread [Next in Thread>