> and find your leak, then solder it.
That in itself is tricky with the original TR3 reservoir. It's soldered
together (with low temperature 'soft' solder) to begin with. So bringing
one spot to soldering temperature will soften the adjacent solder joint and
allow it to pull apart, etc.
I gave up and found another one that didn't leak.
Randall
_______________________________________________
Support Team.Net http://www.team.net/donate.html
http://www.fot-racing.com
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|