Chuck....Since I have no experience yet, this is encouraging and useful
information....and thanks for breaking the ground on this feature.
Joe Alexander
> Just an update. A couple of years ago I got the first one from
> crank-scrapers [they used my oil pan, oil pump and rod and their
>block/crank]. Went in
> when the engine was out. There was a little interference on the tray, but
> the grinder fixed that straight away. I was concerned when I assembled it
>that
> the interference with the oil pump on install would not allow me to remove
> the oil pan with the engine in the car.
>
> I just recently got the new unit. Installed it with the engine in the car.
> Included the teflon scrapers. Went in very easy. Just had to relieve two
> small places where the scraper hit some part of the crank. Very pleased. No
> interference on the tray.
>
> Chuck
>
</HTML>
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|