Mordy Dunst wrote:
> What I have done is perhaps simpler. No NUTS nor Bolts to adjust.
>
> I took the hood bracket and drilled out the pin holding the body braket
> from the hood bracket. Once this was done I realligned the two
> seperated pieces with a 3/8" bolt and welding a 3/8 inch ID steel bush
> on either side of the brackets about 1/2" on either side. I got an
> appropriately long 3/8 PIP pin and reassembled using the removable pin.
> Intially you need to place the hood and braket as you would normally and
> align. But, this is done only this initial time. When I want to remove
> the hood I just take out the PIP pin holding the two bracket halves from
> the from the open Head Lite opening. All remains aligned.
This is what I did on my TR6. It still takes 2 people to hold the hood,
but it takes 30-60 sec to remove/attach. And the hood always stays aligned.
Shane Ingate in NM
_________________________________________________________________
Get Free (PRODUCT) RED Emoticons, Winks and Display Pics.
http://joinred.spaces.live.com?ocid=TXT_HMTG_prodredemoticons_052008
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|