Thanks. I should mention that this is for an 87 mm motor.
- Tony
At 04:07 PM 4/5/2008, MadMarx wrote:
>Be careful with that.
>Better more gap then less.
>I run something around 0.016 and have no blow by.
>The larger the bore, the more gap you need.
>
>Cheers
>Chris
>
>----- Original Message -----
>From: "Tony Drews" <tony@tonydrews.com>
>To: <fot@autox.team.net>
>Sent: Saturday, April 05, 2008 10:57 PM
>Subject: [Fot] Piston ring end gap
>
>
> > This is for a TR-4...
> >
> > I'm in the process of installing pistons and rings. I ended up with
> > new liners this time around, and as a result, I actually have to FILE
> > the rings to get the proper end gap. The instructions recommend
> > 0.008" to 0.014" end gap. My inclination is to go for 0.008, but it
> > occurs to me that they may expand enough due to heat for that to
> be a problem.
> >
> > Has anyone had problems with broken rings with an 0.008" end gap?
> >
> > (Jack is out of town or I'd ask him...)
> >
> > Thanks,
> > Tony Drews
> > _______________________________________________
> > http://www.team.net/donate.html
> >
> > Fot mailing list
> > Fot@autox.team.net
> > http://autox.team.net/mailman/listinfo/fot
> >
> > You are subscribed as tr4racing@googlemail.com
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|