Be careful with that.
Better more gap then less.
I run something around 0.016 and have no blow by.
The larger the bore, the more gap you need.
Cheers
Chris
----- Original Message -----
From: "Tony Drews" <tony@tonydrews.com>
To: <fot@autox.team.net>
Sent: Saturday, April 05, 2008 10:57 PM
Subject: [Fot] Piston ring end gap
> This is for a TR-4...
>
> I'm in the process of installing pistons and rings. I ended up with
> new liners this time around, and as a result, I actually have to FILE
> the rings to get the proper end gap. The instructions recommend
> 0.008" to 0.014" end gap. My inclination is to go for 0.008, but it
> occurs to me that they may expand enough due to heat for that to be a
problem.
>
> Has anyone had problems with broken rings with an 0.008" end gap?
>
> (Jack is out of town or I'd ask him...)
>
> Thanks,
> Tony Drews
> _______________________________________________
> http://www.team.net/donate.html
>
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
>
> You are subscribed as tr4racing@googlemail.com
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|