Charly Mitchell asked:
> I'm starting the rebuild on another TR6 racing motor and I'm looking for a
> little input as to which parts I should be using. I'll be running a CR of
> about 11.5:1, have a KB cam and a stock crankshaft with Cambridge flywheel.
> I'll be using the Lucas PI setup and will have a Tilton clutch.
> I know I'll need to go to some better pistons than stock and will probably
use
> Venolia pistons.
> Anybody got any suggestions on pistons and rods? Is there a connecting rod
> from another manufacturer that will take the place of a TR6 rod that is
> better?
Stock crankshaft!!! =80 Your best investment is first cross-drilling the
crank
and then have it nitrided. Then I would throw money into reducing the
reciprocating
weight.
Shane Ingate, "reliability and strength first", in NM.
_________________________________________________________________
Don't get caught with egg on your face. Play Chicktionary!
http://club.live.com/chicktionary.aspx?icid=chick_wlhmtextlink1_dec
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|