I believe this is the one I'm using
http://www.partsexpress.com/pe/pshowdetl.cfm?Partnumber=330-070. Some
of the stuff sold at Napa, etc. don't have both circuits (SPST not SPDT).
Gt6steve@aol.com wrote:
> Almost exactly the same need. I want to drop out the OD circuit on a
> 700R4 trans when the brakes are applied. Do you have any numbers for
> those Bosch switches?
>
> Thanx, Steve
>
> Steve,
> You can use a commodity Bosch relay. These have normally open and
> normally closed contacts. They are apparently used all over
> modern cars, so can be had very cheaply. I use one for my
> overdrive wiring, so that I can use the a switch on the reverse
> gear to lock out the overdrive, which is opposite from the normal
> switch arrangement.
> Larry
>
> Gt6steve@aol.com wrote
>
> Almost exactly my
>
>
>
> ------------------------------------------------------------------------
> Get a sneak peek of the all-new AOL.com
> <http://discover.aol.com/memed/aolcom30tour/?ncid=AOLAOF00020000000982>.
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|