Almost exactly the same need. I want to drop out the OD circuit on a 700R4
trans when the brakes are applied. Do you have any numbers for those Bosch
switches?
Thanx, Steve
Steve,
You can use a commodity Bosch relay. These have normally open and normally
closed contacts. They are apparently used all over modern cars, so can be
had very cheaply. I use one for my overdrive wiring, so that I can use the a
switch on the reverse gear to lock out the overdrive, which is opposite from
the normal switch arrangement.
Larry
_Gt6steve@aol.com_ (mailto:Gt6steve@aol.com) wrote
Almost exactly my
************************************** Get a sneak peek of the all-new AOL at
http://discover.aol.com/memed/aolcom30tour
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|