I've had this happen several times. I use an old push-rod for this. Just
line up the offending lifter, insert the rod, wiggle it around a bit, and tap
GENTLY to get it back in the bore. Never fails and using the lifter insures
that the inside of the tappet will not be harmed! Good luck.
John
************************************** Get a sneak peek of the all-new AOL at
http://discover.aol.com/memed/aolcom30tour
_______________________________________________
http://www.team.net/donate.html
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|