I did replace the balance tube with clear tubing and you could see the mixture
pulsing back and forth. Interesting ,but of little value.
Never Be beaten by Equipment
Kas Kastner
----- Original Message -----
From: Bill Babcock
To: SHANE Ingate
Cc: fot@autox.team.net
Sent: Saturday, May 05, 2007 1:27 PM
Subject: Re: [Fot] Intake Manifold Crossover
Actually, you see them on a lot of cars. They don't really help flow
much, especially coming in at a right angle as they often do. The
moderate pulses in the intake system by creating a larger air volume
downstream of the butterfly or CV piston. At least that's the reason
given for why they ware added to manifolds to begin with. Most early
intake manifolds look like the pattern for the castings was made from
plumbing bits. Perhaps they were. They flow as badly as they look. A
stock Triumph intake manifold flows about half as much as a similarly
sized modern one.
Bill Babcock
billb@bnj.com
bnj Website for Babcock & Jenkins, a direct and interactive agency
You can subscribe to my Blogs
Via email:
All Aluminum Tour: Touring and racing classic North American tracks.
http://www.feedblitz.com/f/?Sub=168395
Ponohouse : Living and playing in Maui. http://www.feedblitz.com/f/?
Sub=168304
or Via RSS
Ponohouse: http://feeds.feedburner.com/PonoHouse
AllAluminumTour: http://feeds.feedburner.com/AllAluminumTour
On May 5, 2007, at 11:48 AM, SHANE Ingate wrote:
> I don't know anything about this, but intuitvely, if it
> was important, I would think that we would have seen
> x-overs on ALL intake manifolds through the demise of
> carbs.
>
> Shane Ingate, what the $%#@ do I know, in Md
>
>> I have been debating the merits of blocking off the cross over
>> tube in my
>> TR4
>> intake manifold. I have read that the tubes create turbulance and
>> should
>> be
>> blocked off. Reading it and practical application, however, are 2
>> different
>> things. I have also heard of some MG racers blocking them off,
>> but that
>> still does not make it right. Have any of you Listers tried
>> this? Any
>> dyno
>> testing to determine if it is worth while?
>> Joe(B)
>
> _________________________________________________________________
> Get a FREE Web site, company branded e-mail and more from Microsoft
> Office
> Live! http://clk.atdmt.com/MRT/go/mcrssaub0050001411mrt/direct/01/
> _______________________________________________
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
_______________________________________________
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
_______________________________________________
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|