lower the rear with lowering blocks and TR4A U bolts.
Bruce
----- Original Message -----
From: "Gary" <vintage.racer@comcast.net>
To: <fot@autox.team.net>
Sent: Sunday, March 25, 2007 10:08 PM
Subject: [Fot] TR4 Suspension
> Hello All:
>
> I want to lower the ride height on my 1962 TR-4 vintage racer. Currently
> has
> Koni shocks and an unidentified competion front spring with stock spacer.
> Rear suspension is lever shocks and leaf springs. I would lilke to lower
> the
> car 2 - 3 inches.
>
> I plan on making new, longer, rear leaf spring shackles to lower the rear.
> Up
> front, the first step is to remove spring spacer however that will only
> lower
> the car about 1.5". I seem to recall a previous discussion about MGB
> competition springs as an ideal replacement both for spring rate and
> lowering
> the front of the car. Any recommendations for sources for shorter springs
> and
> spring rates would be welcome. Thanks.
>
> Gary
> _______________________________________________
> Fot mailing list
> Fot@autox.team.net
> http://autox.team.net/mailman/listinfo/fot
_______________________________________________
Fot mailing list
Fot@autox.team.net
http://autox.team.net/mailman/listinfo/fot
|