When I needed to lower my MGB, the spring shop to the spring and flipped it
over and then re-arced the spring. I always thought they heated it or did
it in a machine, but he does it by hand. he didn't laugh at me, but charged
me $50 and said thanks.
Charly
TR6
#44
----- Original Message -----
From: <wgrosenbach@juno.com>
To: <19to1tr6@comcast.net>
Cc: <spitlist@cox.net>; <Robertten1@aol.com>; <fot@autox.team.net>
Sent: Wednesday, October 19, 2005 6:36 AM
Subject: Re: Negative camber
> Rob,
> They do a pretty good job of de arching themselves all by themselves. A
spring that has some years on it carrying two up and luggage is probably a
prime candidate. Spring shops will usually laugh you out the door if you ask
them to RE arch an English leaf spring, but should be willing to de arch. If
you have a big enough oven, flatted it to the desired height in a device
that will hold it there and bake it. Not certain but 400 degrees F should do
it. Allow it to cool and it should stay where you set it.
> Bill
>
> -- "rob" <19to1tr6@comcast.net> wrote:
> How do you De Arch it ?
> ----- Original Message -----
> From: "Joe Curry" <spitlist@cox.net>
> To: <Robertten1@aol.com>; <fot@autox.team.net>
> Sent: Sunday, October 16, 2005 3:12 PM
> Subject: Re: Negative camber
>
>
> > Bob,
> > De-arch the road spring. The less arch you have, the more negative
> > camber.
> >
> > Joe
> > ----- Original Message -----
> > From: <Robertten1@aol.com>
> > To: <fot@autox.team.net>
> > Sent: Sunday, October 16, 2005 2:14 PM
> > Subject: Fwd: Negative camber
> >
> >
> >> Return-path: <Robertten1@aol.com>
> >> From: Robertten1@aol.com
> >> Full-name: Robertten1
> >> Message-ID: <1d4.46c2b820.30835176@aol.com>
> >> Date: Sun, 16 Oct 2005 02:47:18 EDT
> >> Subject: Negative camber
> >> To: fot@autox.team.neto
> >> MIME-Version: 1.0
> >> Content-Type: text/plain; charset="us-ascii"
> >> X-Mailer: 9.0 SE for Windows sub 5016
> >> X-Converted-To-Plain-Text: from multipart/alternative by demime 1.01d
> >> X-Converted-To-Plain-Text: Alternative section used was text/plain
> >>
> >> Amici GT6 Racers,
> >>
> >> Question: On the Mk2 is it possible, and suggested, to dial in
negative
> >> camber at the rear? How is it done?
> >>
> >> Curious,
> >> Bob T.
> >> Spit GT, autocrosser
|