A long, long, long time for you!
Chuck
-----Original Message-----
From: John W <john@race-dogs.com>
Cc: Fot@Autox.Team.Net <fot@autox.team.net>
Sent: Sat, 16 Jul 2005 23:43:46 -0700
Subject: Re: Engine Lab is up
Oh when are the Spitfire motors going to be ready to try??
John W.
----- Original Message ----- From: "MDunst / Gasket Works USA"
<gasket.works@gte.net>
To: "Kas Kastner" <kaskas@cox.net>; <Chasgee@aol.com>; <Gt6steve@aol.com>
Cc: "Fot@Autox.Team.Net" <fot@autox.team.net>
Sent: Saturday, July 16, 2005 8:14 PM
Subject: Engine Lab is up
> It took some time but, Paul Smock and I finally got the engine dynamometer
> up and running today. Paul has the DVD to proove it. We used all sorts of
> parts from various sources. Mule stock TR4 engine (built from left over
> spares) and Testing Grade calibrated Torque gauge provided by Paul Smock.
> Digital Driveline Tach by Steve Smith accuracy to 1 rpm, Pyrometers by >
>Frank
> Daley.
>
> Surprisingly quiet with the sound insulation walls we built
> (thnx to John Frymark and Frank Daley) three seperate walls seperated and
> not touching with styrofoam sandwiched. The inside wall is solid 2" > pressed
> 4' x 8' particle board- can you say heavy (thnx to my brother). The > custom
> window frame is four layers thick. Two 1.5 inch plexiglass seperated by > 1/2
> inch air and the outside is 3/8" safety glass on both sides- no scratch or
> marks (specail thanx to my father) who designed, built and installed it.
> Muffler supplied by my old Motorhome.
>
> A few more gauges and we'll be measuring and recording some interesting
> data.
>
> Myths, half truths, and novel ideas will now be tested.
> Lets see where the beef really is.
>
> Now to play...
>
>
> Mordy Dunst
> Gasket Works USA, LLC
> www.headgasket.com
> +626.358.1616 voice
> +626.628.3777 fax
> GMT (-08:00 Pacific)
|