I also need some sleeve nuts and washers for the Revolution wheels on our
car. We need 2 inch long sleeves by 5/8 inch outside diameter with a 7/16-20
inner thread. I tried e-mailing two places in England and Mid-Atlantic
Motorsport and SSP Motorsport in the US after doing an internet search. All
of these places supposedly had the sleeve nuts. Got one reply from England to
try in the US. I will try the suggested places. Please let me know if you
have any luck.
Tim Murphy
TR-4 CT511
Glenn Franco wrote:
> I have two sets of revolution/revolite wheels for my Spitfire race car
> and I'm looking for a source for the shoulder style lug nuts.
> The studs are 7/16" dia thread with a 5/8" diameter shoulder ~1 1/2" long.
> Does anyone out there know of a source for these? They are like the old
> mag wheel nuts with the hardened washer from the 60's through 80's. They
> are still sold in England.
> I have been scouring the internet with not much success.
> Any help would be appreciated.
> Glenn Franco
> 73 Spit race car
> 77 Spit
> 70,71,74 TR6's
> TR250
>
> _____________________________________________________
> This message scanned for viruses by CoreComm
|