fot
[Top] [All Lists]

Re: Electric Water Pump

To: charly@mitchelplumbing.com, vucinic@b140.aone.net.au, BillB@bnj.com,
Subject: Re: Electric Water Pump
From: WEmery7451@aol.com
Date: Sat, 20 Sep 2003 23:07:38 EDT
In a message dated 9/20/03 9:35:01 AM Pacific Daylight Time, 
charly@mitchelplumbing.com writes:

<< Are there any other pulleys which may fit on the pump to slow it down?  How
 about a smaller crank dampener?  this would be beneficial to the alt/gen
 also. >>

I had a machinist mount another lower crank pulley in place of the water pump 
pulley, making both pulleys the same size.  I doubt if many people would want 
to do this, since the assembly is another big heavy clinker.  I also have not 
tried it yet.

<>

I would be interested in this.

<Prev in Thread] Current Thread [Next in Thread>