TR 4 Crank Oil Passage Plugs

fot

TR 4 Crank Oil Passage Plugs

To:	"FOT" <fot@autox.team.net>
Subject:	TR 4 Crank Oil Passage Plugs
From:	"Gerald Van Vlack" <jerryvv@att.net>
Date:	Wed, 8 Jan 2003 21:02:17 -0500

FOT, Any advise on how best to remove the TR 4 Crank Oil Passage Allen head
plugs. I have a freshly ground crank but suspect that the oil galleries in the
crank have not been cleaned by the grinder. Tried using the proper size Allen
wrench but they are so tight that I may have ruined one of the plugs. Can I
apply some heat? Impact wrench? What works; short of taking it back to the
grinder?
Jerry Van Vlack

[More with this subject...]

<Prev in Thread]	Current Thread	[Next in Thread>
TR 4 Crank Oil Passage Plugs, Gerald Van Vlack <= Re: TR 4 Crank Oil Passage Plugs, Justin

Previous by Date:	roll bar "so the roll bar designs keep swimming through my, rgk
Next by Date:	Justin Black Out, Justin
Previous by Thread:	roll bar "so the roll bar designs keep swimming through my, rgk
Next by Thread:	Re: TR 4 Crank Oil Passage Plugs, Justin
Indexes:	[Date] [Thread] [Top] [All Lists]